| 
 ¢Ã Milliamp Source 
  | 
| 
 Ranges  | 
 0.00 to 24.00 mA; -25.0 to 125.0 % of 4 to 20 
mA  | 
| 
 Accuracy  | 
 Quik-Chek 4mA ¡¾(0.03% of 4mA + 0.01 mA) = 
0.011mA Quik-Chek 20mA ¡¾(0.03% of 20mA + 0.01 mA) = 0.016mA 0 to 24mA 
¡¾(0.05% of Reading + 1 LSD)  | 
| 
 Typical Drive Capability  | 
 1200 Ohms @20.00 mA with fresh batteries, 800 Ohms @ 
20.00 mA with low batteries  | 
| 
 Compliance  | 
 Nominal 27 VDC @20 mA with fresh 
batteries  | 
| 
 ¢Ã Power & Measure 2-wire 
Transmitters  | 
| 
 Ranges  | 
 0.00 to 24.00 mA; -25.0 to 125.0 % of 4 to 20 
mA  | 
| 
 Accuracy  | 
 Quik-Chek 4mA ¡¾(0.03% of 4mA + 0.01 mA) = 
0.011mA Quik-Chek 20mA ¡¾(0.03% of 20mA + 0.01 mA) = 0.016mA 0 to 24mA 
¡¾(0.05% of Reading + 1 LSD)  | 
| 
 Output Current  | 
 Up to 24.00 mA  | 
| 
 Typical Drive Capability  | 
 1200 Ohms @20.00 mA with fresh batteries, 800 Ohms 
@20.00 mA with low batteries  | 
| 
 Compliance  | 
 Nominal 27 VDC @20 mA with fresh 
batteries  | 
| 
 ¢Ã 2-wire Transmitter Simulator 
  | 
| 
 Ranges  | 
 0.00 to 24.00 mA; -25.0 to 125.0 % of 4 to 20 
mA  | 
| 
 Accuracy  | 
 Quik-Chek 4mA ¡¾(0.03% of 4mA + 0.01 mA) = 
0.011mA Quik-Chek 20mA ¡¾(0.03% of 20mA + 0.01 mA) = 0.016mA 0 to 24mA 
¡¾(0.05% of Reading + 1 LSD)  | 
| 
 Loop Voltage Limits  | 
 Minimum: 2 
VDC Maximum: 
100 VDC  | 
| 
 Overload Protection  | 
 Current limited to 25 mA nominal  | 
| 
 ¢Ã Milliamp Read   | 
| 
 Ranges  | 
 0.00 to 52.00 mA; -25.0 to 300.0 % of 4 to 20 
mA  | 
| 
 Accuracy  | 
 Quik-Chek 4mA ¡¾(0.03% of 4mA + 0.01 mA) = 
0.011mA Quik-Chek 20mA ¡¾(0.03% of 20mA + 0.01 mA) = 0.016mA 0 to 24mA 
¡¾(0.05% of Reading + 1 LSD)  | 
| 
 Voltage Burden  | 
 0.9V at 4 mA, 1.2V at 20 mA, 1.9V at 50 mA excitation 
current  | 
| 
 ¢Ã Read DC Volts   | 
| 
 Range  | 
 -99.99 to 99.99V DC  | 
| 
 Input Impedance  | 
 >2 Meg Ohms  | 
| 
 ¢Ã General   | 
| 
 Accuracy  | 
 Quik-Chek 4 & 20 mA ¡¾(0.03% of Setting + 1 
LSD) Milliamp & % Ranges ¡¾(0.05% of Reading + 1 LSD) Read DC Volts 
¡¾(0.05% of Span + 1 LSD)  | 
| 
 Warm up Time  | 
 10 Seconds to specified accuracy, 2 minutes to maximum 
accuracy  | 
| 
 Temperature Effect  | 
 Milliamp Ranges: 
¡¾0.008% of Reading/¡ÆC Read DC 
Volts: ¡¾0.012% of Span/¡ÆC  | 
| 
 Batteries  | 
 Three 9V, (1604) batteries (Alkaline supplied and 
recommended)  | 
| 
 Battery Life  | 
 Source and Power Transmitter: Nominal 33 hours at 12 mA, 20 hours at 20 mA with 250 ohm 
load Read mA, DC V & 2-wire 
Simulate: Nominal 100 hours  | 
| 
 Low Battery Indication  | 
 "BAT" indication on the display at approximately 4 hours 
left  | 
| 
 Overvoltage Protection  | 
 Protected to 135V AC/DC for 30 seconds without 
fuses  | 
| 
 Operating Temperature Range  | 
 -5 to +140 ¡ÆF (-20 to +60¡ÆC)  | 
| 
 Storage Temperature Range  | 
 -22 to +160 ¡ÆF (-30 to +70¡ÆC)  | 
| 
 Relative Humidity  | 
 10 to 90%, non-condensing for 24 hours from 0 to 
35¡ÆC  | 
| 
 Dimensions  | 
 121.9mm (4.8 in) x 66mm (2.6 in) x 35.8mm (1.41 
in)  | 
| 
 Weight  | 
 7.8oz 
(0.22kg)  |